 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| V630ME35 9939 Via Pasar * San Diego, CA 92126 TEL (858) 621-2700 FAX (858) 621-2722 VOLTAGE CONTROLLED OSCILLATOR Rev A1 PHASE NOISE (1 Hz BW, typical) -60 -70 (f) (dBc/Hz) -80 -90 -100 -110 -120 -130 -140 1 E+3 FEATURES * Frequency Range: 2255 - 2358 MHz * Tuning Voltage: 0.5-4.5 Vdc * MINI-14S - Style Package APPLICATIONS * WLAN * Digital Radios * Earthstations PERFORMANCE SPECIFICATIONS Oscillation Frequency Range Phase Noise @ 10 kHz offset (1 Hz BW, typ.) Harmonic Suppression (2nd, typ.) Tuning Voltage Tuning Sensitivity (avg.) Power Output Load Impedance Input Capacitance (max.) Pushing Pulling (14 dB Return Loss, Any Phase) 10 E+3 100 E+3 OFFSET (Hz) VALUE 2255 - 2358 -99 -30 0.5-4.5 40 1.53.5 50 50 <3 <5 -40 to 85 MINI-14S 5 16 Vdc mA pF MHz/V MHz C UNITS MHz dBc/Hz dBc Vdc MHz/V dBm Operating Temperature Range Package Style POWER SUPPLY REQUIREMENTS Supply Voltage (Vcc, nom.) Supply Current (Icc, typ.) APPLICATION NOTES * AN-100/1 : Mounting and Grounding of VCOs * AN-102 : Proper Output Loading of VCOs * AN-107 : How to Solder Z-COMM VCOs All specifications are typical unless otherwise noted and subject to change without notice. NOTES: (c) Z-Communications, Inc. Page 1 All rights reserved LOW COST - HIGH PERFORMANCE VOLTAGE CONTROLLED OSCILLATOR TUNING CURVE, typ. 2500 2450 V630ME35 PAGE 2 FREQUENCY (MHz) 2400 2350 2300 2250 2200 2150 2100 2050 2000 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 80 25 -40 c c c TUNING VOLTAGE (Vdc) POWER CURVE, typ. POWER OUTPUT (dBm) 3 2 1 25 0 c -1 0.220 0.320 0.420 0.475 0.000 0.500 -.005 0.215 0.215 .465 0.025 0.285 GROUND PLANE SOLDER PLATED 0.200 0.385 0.500 (c) Z-Communications, Inc. 22 27 22 37 22 45 22 54 22 62 22 71 22 80 22 89 22 98 23 08 23 19 23 29 23 40 23 51 23 63 23 73 23 84 23 94 24 03 24 11 24 19 FREQUENCY (MHz) PHYSICAL DIMENSIONS TYPICAL OF ALL PADS SEE NOTE 3 MINI-14S 415-0060 REV. D (DRAWING NOT TO SCALE) .065 .030 .031 .026 .052 .114 0.500 0.475 0.415 0.315 DETAIL A P2 TABS RANGE: SEE NOTE 5. (4 PLACES) 0.415 0.315 P1=VT P2=RF OUT P3=Vcc P3 NOTES: 1. THE INSIDE RADIUS OF ALL 14 HALF HOLES AT THE PERIMETER OF THE BOARD ARE PLATED TO PROVIDE A SURFACE FOR THE ATTACHMENT OF THE VCO TO A PCB IN 11 LOCATIONS, WITH 3 PADS BEING USED FOR ELECTROMECHANICAL INTERFACE. 14 SOLDER LOCATIONS REQUIRED. 2. THE SURFACE OF THE SHIELD IS TIN PLATED AND MAY BE SOLDERED TO. THE SHIELD'S BASE METAL IS COLD ROLLED STEEL. 3. THE GROUND PLANE IS GROUND AND ATTACHES TO A GROUND TRACK ON THE UPPER SIDE OF THE BOARD AS WELL AS THE SHIELD BY PTH. 4. UNLESS OTHERWISE NOTED ALL DIMENSIONS ARE IN INCHES. 5. UNLESS OTHERWISE NOTED ALL TOLERANCES ARE AS FOLLOWS: TOLERANCES .XXX= .010 .070 TYP BOTTOM VIEW 0.090 0.025 0.000 P1 0.090 SEE DETAIL 'A' .220 .034 0.000 .150 TYP Page 2 Printed in the U.S.A. |
Price & Availability of V630ME35
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |